To be used for making simple connections for rope, chain and cable. Not to be used for overhead lifting. Careful of the locking teeth which can be sharp. Similar to a climbing carabiner but not to be used for that application. [read more]

Stainless steel net snaps can be used for making simple connections for rope, chain and cable. Not to be used for overhead lifting. Careful of the locking teeth which can be sharp. Similar to a climbing carabiner but not to be used for that application. Working Load Limits: 1/4" 180 lbs,  5/16" 280 lbs,  3/8" 400… [read more]

These very handy grips work to pull line and wire rope for set net fishing sites or utility contractors. When the eye is loaded, the cam arm pinches the line. The more load is put on, the stronger the bite. The universal large size covers most common diameters and has parallel jaws which doubles the… [read more]

These are the original Morse-Starrett &  Impacto #3 wire rope cutter. Very portable, no electricity or power needed, just good old fashion elbow grease. A couple of swings with a sledge hammer is all you need to cut through up to 1-1/2” wire rope. *Instruction Manual* [read more]

[read more]

[read more]

[read more]

LINE PULLING SWIVEL - BRIGHT ZINC PLATED STEEL SLINGCO ZSW2096 Swivels designed for use in stringing high tension wires for electrical transmission and distribution (but are not designed to go round bull wheels). The swivel design, in tension stringing, avoids torsional strain accumulation that may damage lines. Slingco Swivels are manufactured to operate within the… [read more]